מדריך Qazqa 97680 Plater מנורה

צריך מדריך עבור Qazqa 97680 Plater מנורה שלך? להלן תוכלו לצפות ולהוריד את מדריך ה-PDF בחינם באנגלית. למוצר זה יש כרגע 0 שאלות נפוצות, 0 הערות ויש לו 0 הצבעות. אם זה לא המדריך שאתה רוצה, אנא צור איתנו קשר.

האם המוצר שלכם פגום והמדריך לא מציע פתרון? עברו אל Repair Café לקבלת שירותי תיקונים ללא תשלום.

מדריך

Please study the instruction manual and below information carefully before installing or using
1. The luminaires may only be installed by authorized and qualified technicians according the valid
regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come
into contact with any areas of the terminal connections or voltage control parts.
3 The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution.
box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
6. Take account of the minimal separation distance from other objects and the room required around the fitting.
7. If in any doubt, consult a professional, taking local installation requirements into account. Some countries
stipulate that lighting may be installed only by registered installers.
8. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V
low voltage conductors.
9. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
10. Clean with a clean, dry cloth or brush, use no solvent
s or abrasives. Avoid dampness on all electrical
components
11. Take account of all available technical information.
12. Take note of the symbols when connecting wires:
13. Meaning of symbols:
III
220-240V~
50Hz
Max. 50mmø
GU10
2Max.50W
IPXX
3x
min.0,75mm²
8mm
Light Angle
35cm²
55º
SAFETY INSTRUCTION
0.5m
For indoor use only, where direct contact with water is impossible
Protection Class I: the fitting must be earthed
Protection Class II: the fitting is doubled insulated and does not require earthing
Protection Class III: the fitting is low voltage
Minimum distance from lighted objects (meters)
Only the self-shielded halogen lamp should be used with the luminaire
Strip the wire to the indicated length (mm);different items require different length
Connect using the specified cable; different items require different cables
The type of lamp and maximum size and wattage indicated in each lighting unit must not
be exceed; different items require different kind of light sources with different bulb icons
The armature is designed to work only with the indicated voltage. Different items require
different working voltage.
The luminaire can be used in combination with a dimmer
The reference light angle and light space of the luminaire
This luminaire cannot be disposed together with normal domestic waste in standard rubbish
can, but you have to bring it to a staging area for electrical waste
This icon indicates the level of water-proof and dust-proof
N =Neutral L =Live =Earth
this product. Please keep this user manual for further reference
INSTRUCTION MANUALINSTRUCTION MANUAL
220-240V~
50Hz
IP65
1800 LM
18 W
2700 K
>80 Ra
30000 H
Plater CL
step4
Fix the expansion screws on the ceiling Fix the bracket with the screws
Connect the L、N wires
Clip the lamp to the bracket
step1 step2
step3
Plater CL White Round 18W LED
Item number: 96806
Overall size:
220x50mm
Plater CL White Round 18W LED PIR
Item number: 96807
Overall size:
280x50mm
1.To save the power,it would light on when the
environment is less than 100LUX.
Function:
2.When there is movement in the sensor area of
6-10m,it lights on automatically. And it lights off
after 30-40 seconds without movement.
Plater CL White Round 18W LED LUX
Item number: 96808
Overall size:
330x50mm
Function:
1.It would light on when the environment is less
than 100LUX,and light off when the environment
is more than 100LUX.
Plater CL White Square 18W LED Plater CL White Square 18W LED PIR Plater CL White Square 18W LED LUX
Item number: 96809 Item number: 96810 Item number: 96811
Overall size: Overall size: Overall size:220x220x50mm 280x280x50mm 330x330x50mm
Function:
Function:
1.To save the power,it would light on when the
environment is less than 100LUX.
2.When there is movement in the sensor area of
6-10m,it lights on automatically. And it lights off
after 30-40 seconds without movement.
1.It would light on when the environment is less
than 100LUX,and light off when the environment
is more than 100LUX.
Plater CL White Round LED
Plater CL White Square LED
step5
step6
Tighten the screws in the both sides of lamp
Take out the lamp from the bracket
הורדת מדריך באנגלית (PDF, 13.18 MB)
(חשבו על הסביבה והדפיסו את המדריך רק אם זה באמת נחוץ)

דירוג

ספרו לנו מה אתם חושבים על הQazqa 97680 Plater מנורה על ידי השארת דירוג מוצר. רוצים לשתף את החוויות שלכם עם המוצר הזה או לשאול שאלה? אנא השאירו תגובה בתחתית העמוד.
האם אתם מרוצים מהQazqa 97680 Plater מנורה?
כן לא
בואו להיות הראשונים לדרג את המוצר הזה
0 הצבעות

הצטרפו לשיחה על המוצר

כאן תוכל לשתף את מה שאתם חושבים על הQazqa 97680 Plater מנורה. אם יש לכם שאלה, תחילה קראו בעיון את המדריך. ניתן לבקש מדריך באמצעות טופס יצירת הקשר שלנו.

למידע נוסף על המדריך זה

אנו מבינים שזה נחמד שיש מדריך נייר עבור הQazqa 97680 Plater מנורה שלכם. אתם תמיד יכולים להוריד את המדריך מהאתר שלנו ולהדפיס אותו בעצמכם. אם אתם רוצים לקבל מדריך מקורי, אנו ממליצים ליצור קשר עם Qazqa. ייתכן שהם יוכלו לספק לכם מדריך מקורי. האם אתם מחפש את המדריך של הQazqa 97680 Plater מנורה שלכם בשפה אחרת? בחרו את השפה המועדפת עליכם בדף הבית שלנו וחפשו את מספר הדגם כדי לראות אם הוא זמין אצלנו.

מפרטים

מותג Qazqa
דגם 97680 Plater
קטגוריה מנורות
סוג קובץ PDF
גודל קובץ 13.18 MB

כל המדריכים עבור Qazqa מנורות
מדריכים נוספים עבור מנורות

מדריך Qazqa 97680 Plater מנורה

מוצרים קשורים

×
Download